Shredder
01020304
SINGLE SHAFT SHREDDER Film shredder Head material shredder
1. Low speed, high torque.
2. Low noise and low dust.
3. Hydraulic pushing system, swing arm forced feeding structure.
4. 90 ° flip for higher utilization of the blade (one blade can be used four times).
5. Gearbox swing arm installation structure, microswitch monitoring, protecting internal gears and motors.
6. All imported SKD-11, D2, DC53, and ASP60 blades are high-strength, wear-resistant, and have a long service life.
7. 2~4 hours before the factory feeding test to ensure the reliability of the equipment.
1. Multiple pore size screens can be selected to ensure that the material crushing size meets customer requirements.
2. Direct placement of materials into large capacity irregular hoppers.
3. Use a moving knife to tear the material and use a fixed knife to further shred the material.
4. The hydraulic pushing device pushes the material towards the rotor.
Main technical parameters
| Model | Rotor diameter(MM) | Rotor diameter(MM) | Spindle speed | Screen aperture(MM) | Host power(KW) | Equipment weight |
| HDC-2550 | 500 | 250 | 72 | 40 | 15 | 1800 |
| HDC-3580 | 600 | 350 | 72 | 40 | 37 | 3600 |
| HDC-35100 | 600 | 350 | 72 | 40 | 45 | 4500 |
| HDC-45100 | 600 | 450 | 72 | 40 | 55 | 5400 |
| HDC-45120 | 800 | 450 | 72 | 40 | 55 | 6400 |
| HDC-45150 | 800 | 450 | 72 | 40 | 75 | 7600 |
※ The above parameters are for reference only, if there is any change, please refer to the actual *
HDC-2550
HDC-3580
HDC-35100
